Cabinet Refacing in Sandy Springs, GA
Use Sandy Springs Cabinet Co to ask about cabinet Refacing in Sandy Springs, including available providers and the assessment needed for your room. A 1960s kitchen in Riverside or High Point often has solid boxes behind doors and fronts that look their age. Cabinet refacing in Sandy Springs, GA replaces every visible surface while the boxes stay on the wall. For cabinet Refacing in Sandy Springs, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
About our cabinet refacing
Most refacing jobs in these neighborhoods keep the original layout intact, which means the project stays smaller, faster and less disruptive than a full tear-out. Call to schedule a measure visit and find out whether your kitchen is a candidate for refacing or whether one box change shifts the scope.
Why Sandy Springs Cabinet Co
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Where refacing is the usual choice in Sandy Springs
Inspect the existing Sandy Springs layout for cabinet Refacing in Sandy Springs, cabinet joints, wall alignment and service positions before deciding which elements can be retained. These are kitchens from the 1960s through the 1980s that have never been fully torn out. The boxes in most of them are solid: plywood or hardwood construction, fastened to the wall studs, still square and plumb after decades of use. What looks dated is the visible layer, the door fronts, drawer faces, hinges and the finish.
Refacing replaces that visible layer without disturbing the boxes. New doors, new drawer fronts, matching veneer or rigid thermofoil on the exposed box faces, and new soft-close hinges go onto the existing structure. The footprint stays. The plumbing stays. The countertop stays if the homeowner is keeping it. For a Riverside or High Point kitchen where the layout works and the boxes are sound, refacing is the shorter and less expensive path to an updated look.
Use the cabinet Refacing in Sandy Springs inquiry to check service availability, product selection and project responsibilities before arranging work or placing an order. A box that fails any of those checks gets flagged for replacement within the same project.
Refacing and the cosmetic permit line
Because refacing keeps the original footprint, it does not move plumbing, does not change the room's dimensions and does not alter the wall structure. In Sandy Springs, work that is limited to surface materials and does not change the mechanical, plumbing or structural layout generally falls within the cosmetic scope. Confirm with Sandy Springs whether the proposed refacing scope needs review before starting work.
This matters for timeline and cost. A full kitchen replacement that moves a sink, adds a gas line for a range or opens a wall requires permit drawings and inspections, which adds weeks and fees to the project. A refacing job skips that step entirely. The homeowner gets the updated look without the administrative overhead.
Sandy Springs Cabinet Co notes on every quote whether the scope is expected to stay cosmetic. If a box replacement involves moving a plumbing connection, that changes the permit picture and the quote reflects it.
The one box that gets replaced
The most common single-box replacement in a refaced 1960s kitchen is the wall-oven cabinet. Original wall-oven cabinets in Riverside and High Point were built for a 24-inch oven, which was the standard width at the time. Today's standard wall oven is 30 inches. The existing opening is too small for a modern oven, and refacing does not change the opening dimensions. It only replaces the visible surfaces.
When a homeowner plans to upgrade the oven at the same time as refacing, that one cabinet box comes out and a new one goes in, sized for the 30-inch unit. The surrounding boxes are still refaced. The new oven cabinet is built to match the new door style and finish so the kitchen reads as one continuous run.
This is the decision point that separates a straightforward refacing quote from a hybrid one. Sandy Springs Cabinet Co measures the existing oven opening at the measure visit and confirms whether the homeowner's planned appliance fits. If it does not, the quote includes the single box replacement alongside the refacing scope, with the price broken out so the homeowner can decide whether to do both now or reface first and handle the oven later.
Refacing cost in Sandy Springs
For cabinet Refacing in Sandy Springs, request an itemized quote showing box sizes, door and drawer choices, fittings, finish and installation scope rather than relying on a general price range.
The factors that move the price within that range:
- Number of door and drawer fronts. A galley kitchen with 15 doors costs less than an L-shaped kitchen with 30.
- Door style. A slab front costs less to produce than a shaker or raised-panel front.
- Material. Painted maple fronts, stained oak fronts and rigid thermofoil each carry different costs. Wood veneer on the box faces costs more than thermofoil.
- Hardware. Soft-close hinges and undermount slides add per-door and per-drawer cost compared to standard hinges.
- Box replacements. Compare the Sandy Springs proposal for cabinet Refacing in Sandy Springs by scope: retained components, new boxes, hardware, delivery, removal and any separate trade work should be identified before you judge the total.
- Demolition and disposal of the removed fronts and any replaced boxes.
These are estimates for Sandy Springs kitchens and can change based on the specific layout, material selections and box condition found at the measure visit. The written quote sets the final price for your refacing project.
The same kitchen, refaced
BeforeAfterThe process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Cabinet Refacing: Common Questions
Can my kitchen be refaced, or does it need full replacement?
The measure visit answers this. Each box is checked for square, plumb, water damage and fastener integrity. If the boxes are sound, refacing is an option. If multiple boxes are damaged or the layout is changing, full replacement makes more sense. Use the cabinet Refacing in Sandy Springs inquiry to check service availability, product selection and project responsibilities before arranging work or placing an order.
What happens to the countertop during refacing?
The countertop stays in place during a standard refacing job. Because the boxes are not moved, the countertop is not disturbed. If a box replacement is part of the scope, the section of countertop above or adjacent to that box may need to be lifted and reset. The quote notes whether countertop work is expected.
How long does a refacing job take on site?
For cabinet Refacing in Sandy Springs, confirm current product availability and the proposed delivery and installation sequence before committing to dates. The doors, fronts and veneer are ordered after the measure visit, and the lead time depends on the material and style selected. The measure visit confirms the expected timeline before the order is placed.
Do you serve my neighborhood in Sandy Springs?
Confirm who will handle the proposed Sandy Springs work for cabinet Refacing in Sandy Springs, which documents or samples can be provided and which responsibilities remain with the homeowner or another contractor. Call to confirm scheduling for your specific address.
What is the difference between refacing and painting existing cabinets?
Refacing replaces the doors, drawer fronts and the veneer on exposed box faces with new materials. Painting leaves the existing doors and fronts in place and applies a new finish over them. Refacing changes the door style, the hardware and the surface material. Painting changes only the color. Use the cabinet Refacing in Sandy Springs inquiry to check service availability, product selection and project responsibilities before arranging work or placing an order.
What does the written quote include?
The quote itemizes every door front, drawer front, veneer panel, hinge and slide by quantity and material. If any boxes are being replaced, each box is listed separately with its size and construction spec. Demolition, disposal and any countertop work are line items. The total is the price for the scope as described, and changes to the scope after sign-off carry a written change order.
Talk to us about cabinet refacing
Tell us about the room, in Sandy Springs or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.